12V SEALED MAINTENANCE FREE AGM VRLA BATTERY

    • Range: 100 Ah to 250 Ah
    • Voltage: 12V
    • Type: Solar & Inverter Battery
    • Container Type: ABS Containers
    • Maintenance Free: Yes, No Topping Required
    • Application: For Solar Application

Warranty

Upto 5 Years

Fast Production

30 Days Production

Delievery

Fast Delievery

MOQ

1X20 Ft.

  • Deep Discharge Recovery

    Can withstand multiple deep discharges (up to 80% DoD - Depth of Discharge) without significant capacity loss.

  • Vibration & Shock Resistance

    Rugged construction with tightly packed plates and AGM technology prevents damage from vibrations, making them ideal for automotive, marine, and industrial use.

  • Wide Operating Temperature Range

    Performs reliably in extreme temperatures (typically -20°C to +60°C). Thermal stability prevents overheating during high-current discharge

  • Safety & Environmental Benefits

    Non-spillable, leak-proof design allows safe installation in any position (except inverted).

Battery Range

Model NameRated Capacity (Amp)Nominal Voltage (V)Dimension (mm) (+-3%)Design LifeWarrantyGross Weights (+-3%)Material Grade
MAGMB-100100 AH12V330 x 173 x 2228-10 Years12 Months30 Kg Grade A
MAGMB-150150 AH12V485 x 170 x 2408-10 Years12 Months44 Kg Grade A
MAGMB-200200 AH12V522 x 240 x 2208-10 Years12 Months58 Kg Grade A
MAGMB-250250 AH12V521 x 269 x 2228-10 Years12 Months62 Kg Grade A

Myoko’s AGM batteries combine German-inspired engineering with strict quality control, ensuring high cranking power (CCA), deep-cycle endurance, and leak-proof safety. A trusted choice for backup power, mobility, and critical systems.

Myoko Battery Factory produces high-performance Absorbent Glass Mat (AGM) batteries designed for reliability, durability, and maintenance-free operation. Ideal for UPS systems, solar storage, marine, automotive, and industrial applications, our AGM batteries deliver superior power with enhanced safety.

  • ISO 9001: 2015 (Quality Management)
  • ISO 14001: 2015 (Environmental Management)
  • IEC 60896: 22 (Stationary Lead-Acid Batteries)
 

Features of Myoko's Battery

Gas Recombination Efficiency

AGM VRLA batteries recombine ~99% of oxygen and hydrogeninternally, minimizing water loss and eliminating the need for venting (unlike flooded batteries)

No Equalization Required

Unlike flooded lead-acid batteries, AGM VRLA batteries do not need regular equalization charges, as overcharging can damage them

Click Me

Sensitive to Overcharging

Must be charged with a voltage-regulated charger(typically 8V–14.7V for 12V batteries). Exceeding 15V can cause excessive gassing and dry out the electrolyte.

Click Me

Lower Sulfation Risk (If Maintained Properly)

Since AGM batteries are sealed and have low self-discharge, they are less prone to sulfation—but must be stored fully charged.

Click Me

Float & Cyclic Applications

Excellent for float (standby) use(e.g., UPS, emergency lighting). Also good for cyclic (daily discharge) use (e.g., solar storage, trolling motors).

Click Me

Weight & Energy Density

Lighter than flooded batteries but still heavier than lithium-ion. Energy density is higher than flooded lead-acid but lower than LiFePO4

Click Me

No Off-Gassing (Under Normal Conditions)

Only releases gas if severely overcharged, making them safer for enclosed spaces

Limited Orientation Flexibility

While spill-proof, most AGM batteries should not be installed upside down(some manufacturers allow side mounting).

Cost vs. Performance

More expensive than flooded batteries but cheaper than lithium-ion. Justified by longer lifespan, safety, and maintenance-free operation.

Get in Touch with Us

Book Your SMF VRLA AGM Battery

123